Model | J6 |
Drive Wheels10" Solid | Optional: 10" Pneumatic |
Caster WheelsFront: 5" Solid | Rear: 6" Solid |
Anti-Tip WheelsN/A | |
Maximum Speed4Up to 6.5 km/h | |
Ground Clearance2.5" (frame) | |
Turning Radius522" | |
Overall Length34.74" without foot riggings | |
Base Width23.19" | |
Seating SizesTRU-Balance® 3 | Synergy®: W: 10-20" D: 10-20" Static: W: 10-20" D: 10-20" Power Tilt: W: 14-20" D: 14-20" Lift & Tilt: N/A |
Seat-to-Floor Heights16TRU-Balance® 3 | Synergy®/Static8: 16.5" - 17.5" Power Tilt8: 16.875" Lift & Tilt8: N/A |
Manual Recline10Yes | |
Battery Size6U-1 | |
Battery Weight1423.4 lbs. | |
Available Electronics1270A Q-Logic 2 NE | 70A Q-Logic 2 NE+ 70A Q-Logic 2 EX |
Battery Charger5A Off-board | |
Motor Packages2-Pole 7 km/h | |
Weight Capacity7300 lbs.9 | |
Base Weight100.2 lbs. | |
Notes: 1 Standard 2 Optional 3 Requires HD Suspension 4 Speed varies depending on the user's weight, terrain type, battery charge, battery condition and tire pressure. 5 Without front riggings 6 Battery capacity may change when adding power positioning systems. 7 Weight capacity is dictated by the selection of seating. 8 All measurements +/- 1/8" with 18" x 18" seat, fixed towers, 300 lbs. weight capacity and solid tires (add 3/8" with pneumatic tires). Depths may increase seat-to-floor height. Contact Customer Service for details. Limited measurements are in the lowest position; does not include elevating system unless specified. 9 250 lbs. maximum weight capacity with TRU-Balance® Systems 10 Maximum dimensions of the Manual Recline vary by power base and seating system. Call for details. 11 Requires Group 34 batteries 12 All Quantum Rehab® Canada units can be ordered with specialty controls 13 Required with high-speed motors 14 Battery weight may vary +/- 3 lbs. based on manufacturer. 15 Weight capacity is reduced to 400 lbs. with the 10" Lift. 16 Seat-to-floor heights are measured with the unit unloaded. |
The information contained herein is correct at the time of publication; we reserve the complete right to alter specifications without prior notice.