Quantum Power Bases
OUTBACK Specifications
| Model | OUTBACK |
| Weight Capacity | 300 lbs. TRU Balance® 3 Power Positioning 350 lbs. Q-Captain Seating |
| Maximum Speed1 | Up to 8 kph Up to 9.65 kph optional |
| Ground Clearance2 | 4.92 in. at motors |
| Turning Radius2 | 49.2 in. |
| Overall Size2,6 | Length: 42 in. without foot riggings Width: 28.82 in. |
| Drive Wheels | 15 in. pneumatic |
| Suspension | Independent Smooth Ride Suspension |
| Range1,4 | Up to 25.75 kilometers at 300 lbs. Up to 27.35 kilometers at 220 lbs. |
| Component Weights5 | Base: 168.6 lbs. Batteries: 58.6 lbs. each |
| Drivetrain | 4 motor, independent drive |
| Brakes | Regenerative and electromechanical2 |
| Batteries3 | Group 27 |
| Battery Charger | 8-amp, off-board |
|
Notes: 1 Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller type, tire type, and tire condition. This specification is subject to a variance of +10%, -5%. 2 Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or -) 3%. 3 AGM, Gel-Cell, Lithium-ion or Hybrid Gel (Hybrid Gel is defined as Nano Silica Gel Electrolyte with High Quality Glass Mat Separators) type required. See “Batteries and Charging.” 4 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity. 5 Battery weight may vary based on manufacturer. 6 Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections. 7 DME providers are responsible for determining appropriate billing codes when submitting for insurance reimbursement. HCPCS codes provided should not be considered as legal advice and do not guarantee reimbursement. Payer coding, coverage and bundling guidelines may apply. |
|
This product conforms to all applicable ANSI/RESNA, ISO 7176 Series, AS 3695.2, and EN12184
standards.
All specifications subject to change without notice.